AMSOIL Excels In V-Twin Torture Test

  • 2019 Harley-Davidson* Street Bob*
  • Milwaukee-Eight* 107 c.i. engine
  • 1,000 miles on engine dyno
  • 300°F (149°C) oil temperature
  • 421°F (216°C) max. cylinder temperature

Extreme heat is the biggest enemy for a powerful air-cooled V-twin engine, like those found on most Harley-Davidson* motorcycles. In fact, when designing its latest V-twin engine platform – the Milwaukee Eight* – Harley asked riders what they wanted from its newest engine. Two themes emerged: more power and less heat.

Extreme heat can ruin your ride
Some riders have complained about intense heat radiating from the engine while riding, particularly the rear cylinder, which doesn’t receive as much airflow as the front cylinder. Extreme heat not only challenges rider comfort, it challenges the engine.

If, for example, heat causes the piston to expand beyond acceptable tolerances, it can rub against the cylinder wall and cause scuffing.

Heat also causes some oils to thin and lose viscosity. The oil can become so thin the engine loses oil pressure, causing the oil-pressure gauge to bottom out.

Riding conditions turn up the heat
V-twin heat becomes especially problematic when riding on hot summer days in conditions that limit airflow over the engine, such as in slow-moving parade or rally traffic. In extreme cases, the bike’s electronic  temperature controls shut down the bike if it gets too hot.

Oil-cooled Milwaukee-Eight engine
Harley introduced its Milwaukee-Eight engine in 2016 in part to reduce extreme heat and enhance rider comfort. The engine uses a system of oil-filled cooling jackets surrounding the cylinders to reduce heat. The oil absorbs heat and carries it to a small oil cooler, where it dissipates into the atmosphere.

1,000-mile dyno test

To test AMSOIL Synthetic V-Twin Motorcycle Oil in the latest V-twin technology, we purchased a 2019 Harley-Davidson Street Bob equipped with a 107-c.i. Milwaukee Eight engine. We instrumented the bike and

rode it on the street to establish a baseline for “real-world” operation. This confirmed that low-speed, low-airflow conditions, like stop-and-go traffic, created the most challenging conditions.

We then installed the bike on the dyno in our mechanical lab and subjected it to a 1,000-mile test designed to simulate the worst-case conditions we saw on the street. One thousand miles is enough to make 640 trips down Main Street in Sturgis.

Airflow over the engine was restricted to hold the oil-sump temperature at a steady 300°F (149°C). Cylinder temperature topped out at 421°F (216°C). In these conditions, the oil can quickly oxidize (chemically break down), which causes the viscosity to increase until it’s out of grade and no longer provides the protection the engine requires.

Extreme heat no match for AMSOIL

Following the test, we chemically analyzed the oil to measure viscosity, oxidation, total base number (TBN) and wear metals. We also examined engine parts, in addition to the compensator, for wear or distress.

As shown, AMSOIL 20W-50 Synthetic V-Twin Motorcycle Oil (MCV) provided exceptional protection. The piston skirt contains virtually no wear, while deposits are minimal given the extreme conditions. In addition, the rings still move freely for maximum compression and power. The wear surfaces on the compensator are also in excellent condition, indicating the oil provided smooth, reliable shifts.

Oil analysis results are also impressive. The oil stayed within its viscosity grade despite the extreme heat. The oil limited oxidation and retained its TBN, which is a measure of its ability to fight corrosive acids. Finally, the oil limited wear metals to trace levels, indicating its excellent level of wear protection.

Here is a link to a quick YouTube video on the test.

*All trademarked names and images are the property of their respective owners and may be registered marks in some countries. No affiliation or endorsement claim, express or implied, is made by their use. All products advertised here are developed by AMSOIL for the use in the application shown.

Reproduced With The Permission Of AMSOIL INC. All Rights Reserved.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.