Motorcycles Are Meant To Be Ridden, Not Pushed.
Len Groom | TECHNICAL PRODUCT MANAGER – POWERSPORTS
As you near the town of Sturgis, SD., the epicenter of biker culture for more than a week every August, traffic slows to a crawl. A mile or two later, you start seeing riders pulled over on the shoulder. Some stand idly by their bikes, some push them down the road as the blazing sun beats down upon them.
How Heat Effects Motor Oil
Here’s what often happens. As heat intensifies, motor oil loses viscosity and becomes thinner. The oil can become so thin that the engine loses oil pressure, causing the oil-pressure gauge to bottom out. The rider may notice increased valve train and gear noise as parts clatter together. Any rider worth his or her salt knows that you don’t run your engine with no oil pressure, so he or she shuts it down and sits alongside the highway (or pushes the bike) until the engine cools enough to restore oil pressure.
Air-cooled V-twins get plenty hot on their own, but riding in slow-moving traffic makes it worse. Crawling along barely above idle doesn’t generate sufficient airflow to cool the engine. Add to that the blazing sun reflecting off the asphalt, and it’s a recipe for trouble. In extreme dyno testing designed to create heat, we’ve seen cylinder temperatures in a 2012 Harley-Davidson* Street Bob* as high as 383°F (195°C).
It’s up to the motor oil to protect the engine despite the intense heat. However, oil becomes thinner as it heats up, and if it becomes too thin, it can fail to form a lubricant film of sufficient thickness and strength to prevent metal components from contacting during engine operation and wearing out. Once the lubricant film fails, it falls on the anti-wear additives to prevent wear. They form a sacrificial layer on components to keep them from contacting. But additives are designed to deplete with time and use. Once they wear out, your engine isn’t protected in this scenario.
Heat And Liquid Cooled Bikes
Although heat is a bigger challenge for air-cooled engines, extreme heat can also negatively affect liquid-cooled bikes, even though they run much cooler. How much cooler? Testing of a liquid-cooled Indian* Scout* in our mechanical lab revealed cylinder temperatures averaged 200°F (93°C), far cooler than the Harley running the same test. That’s because a liquid-cooled motor relies on a jacket of coolant/water surrounding the cylinders to absorb heat and carry it to the radiator, where it dissipates into the atmosphere. Water/coolant is a more effective heat-transfer medium than air, which you can clearly see in the cylinder-temperature difference between the two bikes.
Even so, engine and oil temperature will still increase along with ambient heat, so it’s just as important to use a good motorcycle oil in liquid-cooled engines.
The rate at which oil oxidizes, or chemically breaks down, doubles for every 18°F (10°C) increase in lubricant temperature. Oxidation occurs when oxygen molecules attack oil molecules and result in a chemical reaction that leads to harmful byproducts, like sludge and varnish. The faster the oil oxidizes, the sooner it wears out and requires changing.
Liquid-cooled engines may run cooler and help prevent overheating, but in case you hadn’t noticed, riders are fiercely loyal to their bikes. Their big air-cooled V-twin is an extension of their personality, and they aren’t about to trade it in for another brand just because it’s hot outside.
This situation perfectly illustrates the importance of using AMSOIL products as solutions to motorcycle problems. AMSOIL Synthetic V-Twin Motorcycle Oil uses high-quality synthetic base oils that naturally resist thinning due to extreme heat and mechanical activity better than conventional base oils. The result, it forms a thick, strong lubricating film on engine components despite the intense heat. Although any oil will become thinner in extreme heat, riders who use AMSOIL Synthetic V-Twin Motorcycle Oil won’t see their oil-pressure gauges bottom out, providing the confidence they need to keep riding after others have shut down their bikes and started pushing. With AMSOIL, riders don’t have to buy a different bike, they just have to buy a better motorcycle oil.
For more information about AMSOIL Motorcycle Oils click here and select the viscosity oil your bike uses.
*All trademarked names and images are the property of their respective owners and may be registered marks in some countries. No affiliation or endorsement claim, express or implied, is made by their use. All products advertised here are developed by AMSOIL for the use in the applications shown.
Article from the Fall 2018 Edition of the AMSOIL Preferred Customer Magazine.